Autopage C3-RS-665 Installation Manual page 13

BLUE WIRE — GROUND INSTANT TRIGGER INPUT —
This wire is the ground trigger input wire for hood/trunk pin switches.
GREEN WIRE — NEGATIVE DOOR SWITCH SENSING INPUT —
This wire is the ground trigger input wire for negative door pin switch.
This wire is for "grounding" type factory door pins. Locate the "common
wire" that connects to the door pin switches. Make the connection of
the GREEN Wire.
VIOLET WIRE — POSITIVE DOOR SWITCH SENSING INPUT—
This wire is the positive trigger input wire for positive door pin switch.
This wire is for "positive" type factory door pins (typically FORD).
Locate the "common wire" for all door pins and make the connection of
the VIOLET Wire.
BLACK/WHITE WIRE —
(-) Remote Start Enable Toggle Switch Input
(-)Neutral Safety Switch Input —
When the BLACK/WHITE wire is grounded, the remote start unit is
operable. When this wire is open from ground, the remote start is
disabled.
1. The optional "remote start toggle switch" can be added on to
temporarily disable the Remote Start Device, preventing the vehicle
from being remote started accidentally. This feature is useful if the
vehicle is being serviced or stored in an enclosed area. To disable the
remote start, move the optional remote start enable toggle switch to the
OFF position. To enable the remote start, move the optional remote
start enable toggle switch to the ON position.
2. If needed, this wire can be connected to the PARK/NEUTRAL switch in
the vehicle. (See the TESTING YOUR INSTALLATION GUIDE)
*IMPORTANT NOTE: Directly connect the BLACK/WHITE wire to
the "GROUND" when this wire is not used.
WHITE/VIOLET WIRE:
POSITIVE SAFETY SHUT DOWN INPUT
This wire provides an instant shutdown for the remote start, whenever it
CHANNEL 2
87
Gray Wire
87a
86
30
Fuse
+12V Or Ground
Depending On System
Requirements
+12V
85
Electric Device
13