PLC-XF1000 Expand Serial Command Functional Specifications
8.11 HD data wireless Command
8.11.1 CF_HDWLMODE Command
Command
"CF_HDWLMODE_%1" [CR]
"SINGLE"------------------ 1-1 mode
%1
"BLOADCAST" ---------- 1-N mode
Set communication mode with a radio transmitter.
Details
(Valid only when HD-wireless input is selected)
Acceptable
Response
Unacceptable
8.11.2 CF_HDWLAUTH Command
Command
"CF_HDWLAUTH_%1" [CR]
"EXECUTE"----- Perform the authentication between Tx-Rx.
%1
"RST" -------------Reset the authentication between Tx-Rx.
Perform / Reset the authentication between Tx-Rx.
Details
(Valid only when HD-wireless input is selected and Single mode is set)
Acceptable
Response
Unacceptable
8.11.3 CF_HDWLINID Command
Command
"CF_HDWLINID_%1" [CR]
"********" (Eight digits)----- ID of Tx
%1
* is shown in capitalized letter, from 0 - F.
Set the Input ID of the transmitters when Broadcast mode is selected
Details
(Valid only when HD-wireless input is selected and Broadcast mode is set)
Acceptable
Response
Unacceptable
8.11.4 CF_HDWLFDEF Command
Command
"CF_HDWLFDEF_%1" [CR]
%1
"RST"------Return the settings to Factory default status of HD -wireless setting
Return the settings to Factory Default status of HD data wireless setting
Details
*Valid only when HD-wireless input is selected
* The projector-related setting does not return to Factory default status
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
42/72