Networking - Lexmark MS310 User Manual

Additional printer setup
For Windows users
1
Open the printers folder.
a
Click , or click Start and then click Run.
b
In the Start Search or Run dialog, type control printers.
c
Press Enter, or click OK.
2
Select the printer.
3
Right‑click the printer, and then select Properties.
4
Click the Configuration tab.
5
Do either of the following:
Click Update Now ‑ Ask Printer.
•
•
Under Configuration Options, manually add any installed hardware options.
6
Click Apply.
For Macintosh users
1
From the Apple menu, navigate to either of the following:
•
System Preferences > Print & Scan > select your printer > Options & Supplies > Driver
•
System Preferences > Print & Fax > select your printer > Options & Supplies > Driver
2
Add any installed hardware options, and then click OK.

Networking

Notes:
• Purchase a MarkNet
For information on installing the wireless network adapter, see the instruction sheet that came with the
adapter.
• A Service Set Identifier (SSID) is a name assigned to a wireless network. Wired Equivalent Privacy (WEP), Wi-Fi
Protected Access (WPA), WPA2, and 802.1X - RADIUS are types of security used on a network.
Preparing to set up the printer on an Ethernet network
To configure your printer to connect to an Ethernet network, organize the following information before you begin:
Note: If your network automatically assigns IP addresses to computers and printers, continue on to installing the
printer.
•
A valid, unique IP address for the printer to use on the network
• The network gateway
•
The network mask
• A nickname for the printer (optional)
Note: A printer nickname can make it easier for you to identify your printer on the network. You can choose to
use the default printer nickname, or assign a name that is easier for you to remember.
TM
N8352 wireless network adapter first before setting up the printer on a wireless network.
21