Clearing Jams; Avoiding Jams - Lexmark MS310 User Manual

Clearing jams

Clearing jams
Carefully select paper and specialty media and load them properly to avoid most jams. For more information, see
"Avoiding jams" on page 90. If jams do occur, then follow the steps outlined in this chapter.
Note: Jam recovery is set to Auto by default. The printer reprints jammed pages unless the memory required to hold
the pages is needed for other printer tasks.

Avoiding jams

Load paper properly
•
Make sure paper lies flat in the tray.
• Do not remove a tray while the printer is printing.
• Do not load a tray while the printer is printing. Load it before printing, or wait for a prompt to load it.
•
Do not load too much paper. Make sure the stack height is below the maximum paper fill indicator.
Correct loading of paper Incorrect loading of paper
90