Maintaining The Printer; Networking - Lexmark M1246 User Manual

Maintaining the printer

Maintaining the printer
Warning—Potential Damage: Failure to maintain optimum printer performance, or to replace parts and
supplies, may cause damage to your printer.

Networking

Connecting the printer to a Wi‑Fi network
Using the control panel
1
From the control panel, navigate to:
> Settings >
2
Select Setup On Printer Panel, and then follow the instructions on the display.
Note: For Wi‑Fi‑network‑ready printer models, a prompt for Wi‑Fi network setup appears during initial
setup.
Using Lexmark Mobile Assistant
1
Depending on your mobile device, download the Lexmark Mobile Assistant application from either the
TM
Google Play store or App Store online store.
2
From the control panel, navigate to:
> Settings >
for Printer ID >
3
From your mobile device, launch the application, and then accept the Terms of Use.
4
Grant permissions.
5
Tap Start Wi-Fi Setup, and then select the printer.
6
Select a Wi-Fi network, and then enter your credentials.
7
Tap Finish Wi-Fi Setup.
Connecting the printer to a wireless network using Wi‑Fi Protected Setup
(WPS)
Before you begin, make sure that:
•
The access point (wireless router) is WPS‑certified or WPS‑compatible. For more information, see the
documentation that came with your access point.
•
A wireless network adapter is installed in your printer. For more information, see the instructions that came
with the adapter.
> Network/Ports >
> Network/Ports >
> Wireless >
> Wireless > > Setup Using Mobile App >
64
> Continue