Diagnostic Aids; Configuration Mode - Lexmark M410 - Optra B/W Laser Printer Service Manual

4045-XXX

3. Diagnostic Aids

This chapter explains the tests and procedures to identify printer
failures and verify repairs have corrected the problem.
To run the printer diagnostic tests described in this chapter, you must
put the printer in Diagnostic Mode.

Configuration Mode

Configuration Mode contains a set of menus, settings and
operations which are used to configure the printer for operation. To
access any of the Configuration Mode functions, you must put the
printer in Configuration Mode.
To enter the Configuration Mode:
1. Turn the printer off.
2. Press and hold the Select and Return buttons.
3. Turn the printer on.
4. Release the buttons when "Performing Self Test" displays on the
operator panel. The operator panel will display "CONFIG
MENU" once the printer reaches Configuration Mode.
5. Press either of the Menu buttons (<>) to scroll throught the
"CONFIG MENU" options.
6. Press the Select button to open sub menu options.
7. Press either of the Menu buttons (<>) to scroll through the sub
menu.
8. Press the Return button to go back to the previous level from a
sub menu.
The CONFIG MENU items display on the operator panel in the order
shown:
Prt Quality Pgs
Panel Menus
PPDS Emulation
Buffered Jobs (only displayed if buffered jobs have been stored
on the disk)
Diagnostic Aids
3-1