4045-XXX
FRU
9
Lines spaced 112.8 mm
(4.45 inches) apart
10
Lines spaced 94 mm
(3.7 inches) apart
11
Lines spaced 45.1 mm
(1.78 inches) apart
Lines spaced 52.6 mm
(2.07 inches) apart
Lines spaced 75.2 mm
(2.96 inches) apart
Print Quality - Background
Service Tip: Some background problems can be caused by rough
papers or non-Lexmark toner cartridges. If the rough paper mode is
on, turn it off and run the print test.
Some slick or coated papers may also cause background. Some
problems occur with printers that run a large amount of graphics in a
humid environment. The customer may try to improve the print
quality by increasing the transfer setting.
2-42
Service Manual
Action
Replace the FRUs in the following
order:
alignment assembly
main drive assembly
Replace the FRUs in the following
order:
toner cartridge
main drive assembly
Replace the alignment assembly.