Developer Drive Assembly - Lexmark M410 - Optra B/W Laser Printer Service Manual
Service manual
Hide thumbs
Also See for M410 - Optra B/W Laser Printer:
- User manual (312 pages) ,
- Remanufacturing instructions (17 pages) ,
- Supplementary manual (2 pages)
Table of Contents
Advertisement
4045-XXX
Developer Drive Assembly
1. Remove the inner EMC shield/controller board assembly.
2. Remove the two screws (A) and screw (B).
3. Remove the developer drive assembly.
Note: When you reinstall the developer drive assembly, be sure
that the developer drive assembly engages with left charge
roller arm. Be sure that the developer drive assembly wheel
aligns with the hub on the main drive assembly.
Repair Information
4-13
Advertisement
Table of Contents
