Enterasys 6H308-48 Hardware Installation Manual page 60

Using LANVIEW
Table 4-1 LANVIEW LEDs (continued)
LED
CPU
CPU (cont'd) Amber
4-4 Troubleshooting
Color State
Off Power off.
Amber Blinking. Module in process
of booting.
Solid. Testing.
Green Blinking. Image starts
running.
Solid. Functional.
Red Solid. Processor in reset.
Green Blinking. Indicates that the
and module is in the process of
Amber shutting down.
Alternately (67% on, 33%
and Off off). Indicates that a
shutdown process has
completed. This indication
will remain for 60 seconds
before automatically
restarting.
Recommended Action
Ensure chassis has adequate power.
None.
If the LED remains amber for several
minutes, contact Enterasys Networks
for technical support.
None.
None.
None.
None. This state is activated when the
OFFLINE/RESET switch is pressed for
less than 1 second to start the process
of an orderly shutdown.
While in this state, do not remove any
DFE module.
While in this state, you have 60 seconds
to safely remove the DFE-Gold module
from the chassis.