Connecting To A Modem - Enterasys C1H124-24 Installation Manual

Connecting to Console Port for Local Management
5. Configure your VT emulation package with the following parameters:
When these parameters are set, the Startup screen will display. Proceed to
the installation.
Figure 3-16 Connecting to a Modem
UTP straight-through cable with RJ45
connectors
RJ45 Console port on C1H124-48
3-20 Hardware Installation
Parameter
Mode
Transmit
Bits Parity
Stop Bit
Ä
Ã
RJ45-to-DB25 adapter
Local modem
Setting
7 Bit Control
Transmit=9600
8 Bits, No Parity
1 Stop Bit
Á
À
Â
Section 3.7 to complete
Remote modem