Connecting Cables - Enterasys X-Pedition XSR-1805 Getting Started Manual

Connecting Cables

Perform the following steps to connect your cabling.
1. Connect the Console port with the serial cable provided in the packing box to your PC, as
shown in
2. Connect the NIM port(s) to your High Speed Serial WAN connectors with cabling provided
separately by Enterasys or a third-party source, as shown in
Figure 2-12.
Figure 2-12
Figure 2-13 Cabling WAN Connections (High Speed Serial NIM Shown
Cabling Console Port
Figure
Connecting Cables
2-13.
XSR Getting Started Guide 2-19