Connecting Xsr Cables - Enterasys X-Pedition XSR-1850 Getting Started Manual

Connecting XSR Cables

Perform the following steps to connect your cabling:
1. Connect the serial Console cable provided in the packing box to your PC connector, as shown
in
2. Connect your WAN cables to the T1/PRI or BRI port(s) to your WAN connectors, as shown in
Figure
Figure
Figure 2-7.
Figure 2-7
2-8. Or, connect WAN cabling to your High Speed Serial connector, as shown in
2-9.
Figure 2-8
Connecting Serial Console Cable
Attaching T1/PRI or BRI Port Connector
Connecting XSR Cables
XSR Getting Started Guide 2-7