Motorola MOSCAD 68P02958C00-B User Manual page 94

Site Configuration
For Terminal with Server IP address
Uses the IP address of the Terminal Server Port selected in the Terminal Server Ports screen.
Range: 000.000.000.001-255.255.255.254
User Free Link-IDs starting from
This field defaults to the first available Link ID and generates consecutive, unique Link IDs.
Use Free Port-IDs starting from
This field defaults to Port ID 2001 and generates a Port ID for each inserted port in sequential
order.
Number of Ports to insert (up to xx)
where xx = total number of available ports
Click to enter the number of ports you want to insert.
Range: 1- Maximum (total number of available ports)
Default: 5
Click OK to accept the values and to return to the Terminal Server Ports screen.
Toolbox copies the new ports after the insertion point. The copied Ports are identical to the
source Port, except for the TCP Port ID and Link ID. To save the changes, click on OK or
Apply. A new Terminal Server Port item will appear in the workspace under the Terminal
Server item for each new port. User, advanced physical layer and advanced link layer
parameters can be set for the new ports.
TCP Port ID
The TCP Port ID is not copied since Toolbox automatically assigns the next available TCP
Port ID.
Link ID
The Link ID is not copied since Toolbox automatically assigns the next available Link ID.
5-37