Mechanical Installation - Motorola MOSCAD 68P02958C00-B User Manual

Mechanical Installation

The IP Gateway unit can be supplied with the following two configurations:
Gateway with communication interface
In this configuration, the Gateway is mounted in an NEMA4 housing, suitable for wall
mounting and composed of the following:
Stand-alone Gateway unit
Radio unit applicable for the required frequency range and power, or alternatively, line
unit applicable for interfacing to dedicated or dial-up lines.
A 110V AC power supply + charger (produces +12V DC for the Gateway's logic board
and charges the battery); a 220V AC power supply is available as an option.
12V DC battery rated for 5 Ah operation (10Ah battery is available as an option).
Figure 3-2: IP Gateway with Communication Interface
3-4
Hardware Installation