File Menu; New; Open - Motorola MOSCAD 68P02958C00-B User Manual

File Menu

The commands in the File menu are mainly designed to handle configuration files.

New

The New command (Network Configuration File menu) opens a new network configuration
file. If more than one network configuration file is opened, they can be rearranged using
commands in the Window menu or resized using the standard window operations.

Open

The Open command (Network Configuration, File menu) opens an existing network
configuration file. After activating this command, the ToolBox displays the Open dialog box,
as shown below.
The Open dialog box defaults to the Config sub-directory of the IP Gateway ToolBox
(Itbox550) directory. The Config sub-directory is where the ToolBox stores configuration files
by default.
The Open command allows you to open applications that have been developed under earlier
ToolBox versions. You do not have to upgrade your applications in order to continue
development under the new version.
Select the configuration file (see parameters below) and click OK to load it.
Dialog box parameters
Use the parameters in the order specified below. Normally you'll only use the File Name
parameter.
5-62
Network Configuration