Installation Procedures - Motorola MOSCAD 68P02958C00-B User Manual

Installation Procedures

This document outlines the instructions for installing the IP Gateway Toolbox Application
software. An installation CD-ROM is supplied with the IP Gateway Toolbox.
Follow the instructions on the screen.
To install the IP Gateway Toolbox software, proceed as follows:
1. Insert the installation CD-ROM in the CD drive.
2. Select Install IP Gateway Toolbox V5.50.
3. The Install Wizard displays the product's Splash Logo (see Figure 4-1) and the setup
program prepares the InstallShield(r) for installation.
Figure 4-1: IP Gateway Toolbox Application Splash Logo
4. The Install Wizard starts with the Welcome Dialog screen (see Figure 4-2). Make sure to
exit all Windows applications before continuing with the setup. If you have other Toolbox
applications running, be sure to stop the communications driver after you quit all
applications. After reviewing the instructions, click NEXT.
4-3
Software Installation