Transport Device = Trans1, Trans2 - Motorola MOSCAD 68P02958C00-B User Manual

## 49 LEVEL = 10,11
# of transmitted frames
# of transmission fails
# of received frames
# of received frames (with error)
Mask of errors (receive)
Number of non-properly authenticated SYNC frames
1. The number of unformatted frames that have been transmitted.
2. The number of unformatted frames that have been transmitted and for which the physical layer
returned a fail signal.
3. The number of received frames includes only correct frames (including acknowledgment frames).
4. The number of unformatted frames that have been received with some error.
5. The following figure illustrates the mask:
6. Number of synchronization frames which were not properly authenticated.
b15 . . . . . . . . . . b8
TRANSPORT
## 64 LEVEL = 0
Logical channel no.
Timeout between Tx
Timeout between channel busy retries
Timeout between Rx frames
Timeout of Rx wait
Current timeout between Tx retries
Current timeout between channel busy retries
Current timeout between Rx frames
Current timeout of Rx waiting
No. of Tx retries
No. of channel busy retries
Current no. of Tx retries
b7 b6 b5 b4 b3
frame, more than 200 bytes
inverse byte, inverse byte
invalid byte after inverse byte
CRC error
Recovery of UF heap
DEVICE = TRANS1, TRANS2,...
retries
(till session chk)
b2 b1 b0
unformatted buffer heap is empty
inverse byte, end of frame
empty frame received
invalid destination
C-6
Software Diagnostics Output
: %% 1
: %% 2
: %% 3
: %% 4
: %% 5
: %% 6
: %% 1
: %% 2
: %% 3
: %% 4
: %% 5
: %% 6
: %% 7
: %% 8
: %% 9
: %% 10
: %% 11
: %% 12