Color Adj; Sync; Motion Detection - EverFocus PoleStar EQ550 Operation Instructions Manual

6.8.2 COLOR ADJ

Adjust the Color Gain from 0 ~ 15
SPECIAL
CAMERA ID OFF
> COLOR ADJ. <┘

SYNC.

INT
MOTIION DET OFF
PRIVACY OFF
MIRROR OFF
ON <┘
SHARPNESS
RESET
RETURN <┘
6.8.3 SYNC
There are two SYNCHRONIZATION modes: INTERNAL and EXTERNAL
LINE-LOCK. In LINE-LOCK mode, without a synchronous generator, it
synchronizes the video signal between cameras. The Line-Lock synchronization
is only used in the places of 60Hz (NTSC models) or 50Hz (PAL models).
-INT: Internal synchronization
-LL: External line-lock synchronization
=> If you choose "LL", you can adjust the phase your wish to set. Then press
the SET button. You can adjust the phase you wish to set from 0 to 359.
SPECIAL
CAMERA ID OFF
COLOR ADJ. <┘
LL <┘
> SYNC.
MOTIION DET OFF
PRIVACY OFF
MIRROR OFF
ON <┘
SHARPNESS
RESET
RETURN <┘

6.8.4 MOTION DETECTION

Polestar enables you to observe movements of objects in 4 different places on the
screen, the message "MOTION DETECTED" appears on the screen when
movement is detected; therefore this helps to improve supervision efficiency. The
camera detects an object's movement by sensing discrepancy of outline.
1) Please direct the arrow to point to "MOTION DET" by using the UP or DOWN
button.
2) Select "ON" by pressing the LEFT or RIGHT button.
3) Press SETUP button.
> LEVEL
> PHASE
- 18 -
COLOR GAIN.
|++++++++| 8
SYNC
|++++++++| 0