Dnr (Dynamic Noise Reduction); Sens-Up - EverFocus PoleStar EQ550 Operation Instructions Manual

6.6 DNR (Dynamic Noise Reduction)

Dynamic Noise Reduction in video images has the following effects.
1. Images are brighter and sharper.
2. When the level of noise is reduced, the performance of a camera can apparently be
improved.
3. When it is recorded digitally, reduced noise can reduce image file size.
As the level of gain changes, the background noise in the low light level automatically
decreases.
1. Please direct the arrow to point to "DNR" on the SETUP menu by using the UP and
DOWN buttons.
2. Select the mode you would like to operate by pressing the LEFT or RIGHT button.
SETUP
DC <┘
LENS
SHUTTER
WHITE BAL.
BACKLIGHT
AGC
> DNR LOW
AUTO <┘

SENS-UP

SPECIAL <┘
EXIT
OFF: No reduction in noise level.
LOW: Little reduction in noise level with nearly no ghost image. Default value is
LOW.
MIDDLE: Just enough reduction in noise levels without causing much ghost
imaging.
HIGH: Huge reduction in noise level, which may cause much ghost imaging.
NOTE:
When AGC is turned off, DNR will be disabled.
6.7 SENS-UP
SENS UP is used to keep a brilliant, vivid screen image by automatically detecting changes in
the level of light under low light level conditions.
1. Please direct the arrow to point to "SENS UP" on the SETUP menu by using the UP and
DOWN buttons.
2. Select the mode you would like to operate by pressing the LEFT or RIGHT button.
AUTO: Low light level auto mode. Default value is AUTO (Up to X 10).
___
ATW
OFF
MIDDLE
- 15 -