Control By Keyboard; Day/Night Mode Setting From Keyboard - EverFocus PoleStar EQ550 Operation Instructions Manual

7.4 Control by keyboard

8 7 6
4
5 3
2 1
2 1
1. Press Menu key to enter setup menu. If the item has its own setting menu (sign
press this button again to display the sub-menu.
2. Sway the joystick
This allows you to move between selection items in setup menu.
3. Sway the joystick
parameter changes each time as the item is selected by joystick.
4. Sway the joystick
parameter changes each time as the item is selected by joystick.
NOTE:
6. USER SETUP
Please refer to "
every setup function.

7.5 Day/Night mode setting from keyboard

1. For Day mode, press 88 + Position key, it changes to day mode immediately.
2. For Night mode, press 89 + Position key, it changes to night mode immediately.
3. For Auto Day/Night mode, press 90 + Position key. Please be informed that if Auto
Day/Night mode is selected, the standard that a sensor will detect D/N is based on
camera's D/N setting from the switch at back panel. If D/N setting from camera's switch
is OFF, then this Auto Day/Night mode will be ineffective while staying in Day mode.
NOTE:
Control from keyboard has the highest priority rather than control by camera itself. If there is
any conflict between local and remote control, the camera will follow the command from
remote site.
to move the cursor downwards and
to select or adjust the parameters of the selected item. The
to select or adjust the parameters of the selected item. The
" for more detailed description about Setup Menu and
to move the cursor upwards.
- 27 -
),