EverFocus PoleStar EQ550 Operation Instructions Manual page 20

SPECIAL
CAMERA ID OFF
COLOR ADJ. <┘
SYNC. INT
ON <┘
> MOTIION DET
PRIVACY OFF
MIRROR OFF
SHARPNESS
RESET
RETURN <┘
Please select the area you would like to detect from the 4 areas in AREA SEL mode.
Please select ON mode for the chosen area.
Please use the UP or DOWN button to move between TOP, DOWN, LEFT and
RIGHT for adjusting the size of the area to be detected.
Please use the LEFT or RIGHT button to adjust the value for size of the area to be
detected.
AREA1
AREA3
Additionally, it is possible to change the position of the area to be detected. Please
refer to the following example for detailed steps on moving AREA1 to center.
The original position of AREA1 was TOP: 10, DOWN: 25, LEFT: 20 and RIGHT: 40.
1.
AREA1
ON <┘
AREA2
AREA4
> AEREA SEL
AREA STATE
TOP
DOWN
LEFT
RIGHT
- 19 -
MOTION DETECTION
AREA1
ON
|+++++++++| 10
|+++++++++| 25
|+++++++++| 20
|+++++++++| 40
Press SET to return