Color Adj; Sync; Motion Detection - EverFocus True Day/Night Indoor Vandal Color Camera ED550 Operation Instructions Manual

5.8.2 COLOR ADJ

Adjust the Color Gain from 0 ~ 15
SPECIAL
CAMERA ID
> COLOR ADJ. <┘

SYNC.

MOTIION DET
PRIVACY
MIRROR
SHARPNESS
RESET
RETURN <┘
5.8.3 SYNC
There are two SYNCHRONIZATION modes: INTERNAL and EXTERNAL
LINE-LOCK. In LINE-LOCK mode, without a synchronous generator, it
synchronizes the video signal between cameras. The Line-Lock synchronization is
only used in the places of 60Hz (NTSC models) or 50Hz (PAL models).
-INT: Internal synchronization
-LL: External line-lock synchronization
=> If you choose "LL", you can adjust the phase your wish to set. Then press the
SET button. You can adjust the phase you wish to set from 0 to 359.
SPECIAL
CAMERA ID
COLOR ADJ. <┘
> SYNC.
MOTIION DET
PRIVACY
MIRROR
SHARPNESS
RESET
RETURN <┘

5.8.4 MOTION DETECTION

ED550 camera enables you to observe movements of objects in 4 different places on
the screen, the message "MOTION DETECTED" appears on the screen when
movement is detected; therefore this helps to improve supervision efficiency. The
camera detects an object's movement by sensing discrepancy of outline.
1) Please direct the arrow to point to "MOTION DET" by adjusting the switch to
UP or DOWN direction.
2) Select "ON" by adjusting the switch to LEFT or RIGHT direction.
3) Press SET button.
OFF
INT
OFF
OFF
OFF
ON <┘
OFF
LL <┘
OFF
OFF
OFF
ON <┘
- 19 -
COLOR GAIN.
> LEVEL |++++++++| 8
SYNC
> PHASE |++++++++| 0