Blc; Dnr - EverFocus EQH5102 User Manual

1080p mini ir bullet camera

Hide thumbs Also See for EQH5102:

Table of Contents

4.1.4 BLC

Press the Enter / Confirm button to enter the submenu.

MODE

Use the  and  buttons to select OFF and BLC. Please notice the WDR is only working on

round 7.5FPS.

BLC OSD, POS and SIZ

Select OFF to disable the BLC function, or select ON to enable the BLC function and for further setup.

After selecting an area block, enter the BLC POS / SIZ and X / Y setup page, a "POSITION" sign

displayed on the screen. Use the direction buttons to move the area to the desired position. Press

the Enter / Confirm button to confirm the position, a "SIZE" sign displayed on the screen. Use the

direction buttons to adjust the size for the area.

4.1.5 3D-DNR

Press the Enter / Confirm button to enter the submenu.

Switch to HIGH, MIDDLE, LOW and OFF to enable or disable noise reduction on dynamic

recordings.

This Manual:http://www.manuallib.com/everfocus/eqh5102-mini-ir-bullet-camera-manual.html

EZH5102 1080p Mini IR Bullet Camera

Table of Contents