8Vsb - Ericsson RX8000 Series Reference Manual

To choose the Select input type:
1. Press the Edit key. The cursor appears below the displayed type (ASI shown
2. Use the
3. Press Save to save the new settings or Edit to abandon the operation and
To choose the Primary input:
1. Move to the Primary Input function using the
2. Press the Edit key. The cursor appears below the displayed type (ASI shown
3. Use the
4. Press Save to save the new settings or Edit to abandon the operation and
3.5.4.2

2.2 8VSB

To access this function, press the
8VSB
2.2
To choose the Channel to be monitored:
1. Press the Edit key. The cursor appears below the the first character of the
2. Use the
3. Press Save to save the new settings or Edit to abandon the operation and
3.5.4.3 2.3 8VSB CTRL
To access this function, press the
8VSB CTRL |DIRECT FREQUENCY
2.3
To enable/disable the Direct Frequency function:
1. Press the Edit key. The cursor appears below the current option.
2. Use the
EN/LZT 790 0005 R1A
above).
(Up) and
8VSB and AUTO (dependent on model type).
return to the current setting.
above).
(Up) and
and 8VSB (dependent on model type).
return to the current setting.
|CHANNEL 61
|FREQUENCY
current channel number.
(Up) and
return to the current setting.
|AUTO TUNE
(Up) and
options until the required option is displayed.
(Down) keys to toggle between the available types: ASI,
(Down) keys to toggle between the available types: ASI
(Down) key. The following screen is displayed:
(Down) keys to select the required number.
(Down) key. The following screen is displayed:
(Down) keys to toggle between the Enabled/Disabled
(Forward) key
SNR 0.00dB
755.000 MHz
DISABLED
DISABLED
Chapter 3
3-39