Ericsson RX8000 Series Reference Manual page 84

Chapter 3
3.5.3.2.6.5 2.2.6.5 Row Port 1
To view and edit the Row Port 1, press the
displayed:
STREAM 1
2.2.6.4
To edit the Row Port 1 value:
1. Press the Edit key. The cursor appears below the first character of the displayed
2. Edit the parameter value as required using the
3. Press Save to save the new settings or Edit to abandon the operation and
This is the last of the Stream 1 screens. To return to the top level Stream 1 screen,
press the
3.5.3.2.7 2.2.7 Stream 2/ Unicast Enable 2
To view and edit the Unicast Enable 2, press the
screen is displayed:
STREAM 1
2.2.7
The Unicast 2 may be enabled/disabled and all of the Stream 2 parameters viewed
and edited (where possible) as descibed in Section 3.5.3.2.6. When complete, press
the
3.5.3.2.8 2.2.8 Alarms/ Alerts
To view the unit alerts, press the
ALARMS
2.2.8
3.5.3.2.8.1 2.2.8.1 Both Ports Link Down/ No Data
To view the port alerts, press the
displayed:
ALARMS
2.2.8.1
3-36
|ROW PORT 1
|00000
value.
to select each digit in turn, and then using the
increment or decrement the digit.
return to the current setting.
(Back) key.
|UNICAST ENABLE 2
|TRUE
(Back) Key to return to the top level Stream 2 screen.
|ALERTS
|Both ports link down, Both ports no data
|BOTH PORTS LINK DOWN
|BOTH PORTS NO DATA
(Down) key. The following screen is
(Back) and
(Up) and
(Down) key. The following
(Down) key. The following screen is displayed:
(Forward) key. The following screen is
(Forward) keys
(Down) keys to
>
Alarm
Alarm
EN/LZT 790 0005 R1A