Build - Ericsson RX8000 Series Reference Manual

Chapter 3
To edit the Gateway address:
1. Press the Edit key. The cursor appears below the first character of the Gateway
2. Edit the address as required using the
3. Press Save to save the new settings or Edit to abandon the operation and
3.5.1.1.6 1.1.6 Status
This menu displays the status of the IP control interfaces. To access the Status
menu, press the
STATUS
1.1.6
When Status menu details have been viewed, press the
the Network sub-menu.
3.5.1.2

1.2 Build

The Build menu allows the viewing of all equipment SW, FW and HW Version
numbers. To access the Build menu, press the
is displayed:
BUILD
1.2
3.5.1.2.1 1.2.1 SW Version
To view the software (SW) version, press the
is displayed:
VERSIONS
1.2.1
3.5.1.2.2 1.2.2 PS Version
To view the PS version, press the
VERSIONS
1.2.2
3-12
address.
each digit in turn, and then using the
decrement the digit.
return to the current setting.
(Down) key. The following screen is displayed:
|CTRL 1 LINK STATUS Down
|CTRL 2 LINK STATUS Down
|Version
|SW, FW, HW
|SW VERSION
|4.3.2 (Bank 0)
|PS VERSION
|0.14
(Back) and
(Up) and (Down) keys to increment or
(Down) key. The following screen
(Forward) key. The following screen
(Down) key. The following screen is displayed:
(Forward) keys to select
(Back) key to return to
EN/LZT 790 0005 R1A