Ericsson RX8000 Series Reference Manual page 64

Chapter 3
2. Use the
3. Press Save to save the new settings or Edit to abandon the operation and
To return to the System menu, press the
3.5.2 2 Input (Satellite Input Card RX8200/HWO/DVBS2)
The Input menu is used to select the various inputs to the equipment and set input
parameters. To access the Input menu from the System menu, press the
key. The following screen is displayed:
INPUT
2
3.5.2.1 2.1 Select/Primary Input
To access this function, press the
displayed:
INPUT
2.1
The
input types.
To choose the Select input type:
1. Press the Edit key. The cursor appears below the displayed type (ASI shown
2. Use the
3. Press Save to save the new settings or Edit to abandon the operation and
To choose the Primary input:
1. Move to the Primary Input function using the
2. Press the Edit key. The cursor appears below the displayed type (ASI shown
3. Use the
4. Press Save to save the new settings or Edit to abandon the operation and
3-16
(Up) and
return to the current setting.
|UNLOCKED
|---
|SELECT INPUT
|PRIMARY INPUT ASI
(Forward) and
above).
(Up) and
SAT and AUTO (dependent on model and option licences obtained).
return to the current setting.
above).
(Up) and
and SAT (dependent on model and option licences obtained).
return to the current setting.
(Down) keys to toggle between OFF and ON.
(Back) key twice.
Mbits/s
(Forward) key. The following screen is
ASI
(Back) keys are used to choose the Select and Primary
(Down) keys to toggle between the available types: ASI,
(Down) keys to toggle between the available types: ASI
INPUT: ASI
--- >
(Forward) key
EN/LZT 790 0005 R1A
(Down)