Ca Systems; Service Table - Ericsson RX8000 Series Reference Manual

Chapter 3
3. Select the required option and press Save to save the new settings or Edit to
3.5.6.4.2 3.4.2 – 3.4.8 CH 3+4, 5+6, 7+8, 9+10, 11+12, 13+14 and 15+16 Embedding
To edit the embedding options for these channels, proceed as detailed for CH 1+2
above.
To this is the last of the Service menu options, to return to the Service menu and
access further menus, press the
3.5.7

4 CA Systems

The CA Menu is used to access and edit the conditional access systems used in the
equipment. To access the CA Menu from the Service Menu, press the
key. The following screen is displayed:
CA
4
3.5.7.1

4.1 Service Table

To access the CA Service Table, press the
displayed:
CA
4.1
3.5.7.1.1 4.1.1 CA Summary
To access the CA summary, press the
displayed:
CA
4.1.1
The second line of the display shows the status of the CA system. Possible
messages are: NO SERVICE, SERVICE CLEAR, SERVICE AUTHORIZED, CAM
PRESENT DECRYPTING or CONDITIONAL ACCESS ERROR.
3.5.7.1.1.1 4.1.1.1 Service ID
To view the Slot 1 Service ID, press the
displayed:
SLOT 1
4.1.1.1
3-52
options Decoder 1, STEREO to Decoder 6, STEREO are available. If disabled,
available options are Decoder 1, STEREO and Decoder 2, STEREO.
abandon the operation and return to the current setting.
|CA SYSTEMS
|
|SERVICE TABLE
|
|CA SUMMARY
|CONDITIONAL ACCESS ERROR
|SERVICE ID:
|SERVICE NO PMT
(Back) key three times.
(Forward) key. The following screen is
(Forward) key. The following screen is
(Forward) key. The following screen is
2
(Down)
>
>
>
>
EN/LZT 790 0005 R1A