2.3 Port Information
1) Port information when serial port is used
The port information that can be set with the SetupPOS utility is as follows.
Baud rate [bps]
Bit length [bit]
Parity
Stop bit [bit]
Handshake
Output buffer length [byte]
Output interval time [ms]
The default settings are as shown in the following table.
Baud rate [bps]
Bit length [bit]
Parity
Stop bit [bit]
Handshake
Output buffer length [byte]
Output interval time [ms]
2) Port information when using parallel port
The port information that can be set with the SetupPOS utility is as follows.
Output buffer length [byte]
Output interval time [ms]
The default settings are as shown in the following table.
Output buffer length [byte]
Output interval time [ms]
Item
4800, 9600, 19200, 38400, 57600, 115200
8
NONE, ODD, EVEN
1
DTR/DSR
32 to 1024
0 to 9999
Item
Item
Item
6
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T88IV)
Version 2.65 Jul. 2009
Setting range
Setting range
9600
8
NONE
1
DTR/DSR
1024
2500
Setting range
32 to 1024
0 to 9999
Setting range
1024
2500