Width And Height Properties - Epson T88IVP - TM Two-color Thermal Line Printer Application Manual

3.1.3 Width and Height Properties

The width and height properties are described below.
RecLineSpacing
JrnLineSpacing
SlpLineSpacing
SlpLineHeight [dot]
RecLineHeight [dot]
JrnLineHeight [dot]
SlpLineWidth [dot]
RecLineWidth [dot]
JrnLineWidth [dot]
RecSidewaysMaxLines
RecSidewaysMaxChars
RecLinesToPaperCut
SlpSidewaysMaxLines
SlpSidewaysMaxChars
SlpMaxLines
X: No settings
*1
When Font A is selected. In the case of a line thermal station, the Line Spacing setting is
identical with the height of the characters which means that it can be set at up to 17
when Font B is selected.
*2
It can be changed by the settings of the RecLineSpacing or the RecLineHeight.
*3
It can be changed by the settings of the font width.
• When the RecLineSpacing is 0, the RecLinesToPaperCut is –1.
*4
It can be changed by the settings of the RecLineSpacing or the character height.
Property
12
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T88IV)
Version 2.65 Jul. 2009
Settings
Default Maximum
Value value [dot]
30 127
X X
X X
X
(Font A) 24
(Font B) 17
X
X
512
X
*2
17
(Font A) 69
(Font B) 92
*4
5
X
X
X
Minimum
value [dot]
*1
24
X
X
*3
*3