2.3 Port Information
1) Port information when serial port is used
The port information that can be set with the SetupPOS utility is as follows.
Baud rate [bps]
Bit length [bit]
Parity
Stop bit [bit]
Handshake
Output buffer length [byte]
Output interval time [ms]
The default settings are as shown in the following table.
Baud rate [bps]
Bit length [bit]
Parity
Stop bit [bit]
Handshake
Output buffer length [byte]
Output interval time [ms]
Item
Item
6
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-H5000II/TM-U590)
Version 3.00 Feb. 2019
Setting range
2400, 4800, 9600, 19200, 38400
8
NONE, ODD, EVEN
1
DTR/DSR
32 to 1024
0 to 9999
Setting range
9600
8
NONE
1
DTR/DSR
1024
2500