Cooktep - GE JBP80 Use And Care & Installation Manual

Metal Parts
Do not use steel wool, abrasives,
ammonia or commercial oven
cleaners. To safely clean surfaces;
wash, rinse and then d_ 7 with a
soft cloth.
Painted Surfaces
Painted surfaces include the sides,
control panel and &awer front.
Clean these with soap and water or
a vinegar and water solution.
Do not use commercial oven
cleaners, cleansing powders, steel
wool or harsh abrasives on any
painted surface.
Glass Window
To clean the outside of the oven
window, use a glass cleaner. Rinse
and polish with a dry cloth.
Oven Vent
(Electric Coil Models)
The oven is vented through an opening under the
right rear surface unit. Never cover the opening with
aluminum foil or any other material. This would
prevent the oven vent from working properly.
OvenVent
(Glass Cooktop Models)
The oven is vented through an opening at the rear of
the cooktop. Never cover the opening with aluminum
foil or any other material. This would prevent the
oven vent flom working properly.
Vent Vent
Convection cooking cooks most foods 25% faster. This faster cooking causes the oven vent to put out more
steam or water vapor than usual. The steam will condense on surfaces such as the cooktop, control panel and
adjacent pans. This is normal.
Oven Heating Elements
Do not clean the bake element or the broil element.
Any soil will burn off when the elements are heated.
The bake element can be lifted gently to clean the
oven floor. Ifspillovers, residue or ash accumulate
around the bake element gently wipe around the
element with warm water.
Broil Element
Bake Element
t_
Porcelain Enamel Cooktop
(EtectricCoilModeis)
The porcelain enamel finish is sturdy but
breakable if misused. This finish is acid-resistant.
However, any acidic foods spilled (such as truit
juices, tomato or vinegar) should not be permitted to
remain on the finish.
If acids spill on the cooktop while it is hot, use a
dry paper towel or cloth to wipe it up right away.
When the sur_hce has cooled.washwidlsoapand
water. Rinse well.
For other spills such as fat smatterings, wash with
_o:_pond wate_ or cleansing pow'ders after the surface
has cooled. Rinse well. Polish with a dry cloth.
47