3
3
Erasing Copy Settings
1
2
3
3-36
Memory Keys
Verify the settings ➞ press [OK] ➞ [Done].
If you select a key that does not have copy settings stored in it, [OK] is grayed
out and cannot be pressed. Select another key that has copy settings stored in it,
or press [Cancel].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
NOTE
•
Recalling copy settings from memory cancels the current copy settings.
•
You can make changes to the recalled copy settings.
•
If you press another key, the copy settings stored in that key are recalled.
Press [Special Features] ➞ [Mode Memory].
If necessary, see the screen shot in step 2 of "Storing Copy Settings," on p. 3-29.
Press [Store/Erase].
If necessary see the screen shot in step 3 of "Storing Copy Settings," on p. 3-29.
Press [Erase].