Flow of Copy Operations
1
This section describes the flow of basic copy operations.
NOTE
Before using the Copy function, it is useful to read the following topics:
- Main power and control panel power (See Chapter 1, "Before You Start Using This
- Routine maintenance (See Chapter 7, "Routine Maintenance," in the Reference Guide.)
1
1-6
Flow of Copy Operations
Machine," in the Reference Guide.)
Press the appropriate keys in accordance with the messages
displayed on the touch panel display.
If there are no messages displayed, proceed to step 2.
● If the message <Enter the Department ID and Password using the
numeric keys.> appears:
❑
Press [Department ID] ➞ enter the Department ID using
keys).
❑
Press [Password] ➞ enter the password using
❑
Press
(Log In/Out).
The Basic Features screen is displayed.
NOTE
For instructions on entering the Department ID and password, see Chapter 6,
"System Manager Settings," in the Reference Guide.
-
(numeric
-
(numeric keys).