3
5
6
3-16
Frame Erase
● If you want to set the top, left, right, and bottom widths
independently:
❑
Press [Adjust Each Dim.].
❑
Select the desired frame erase borders ➞ press [-] or [+] to set their respective
frame erase widths ➞ press [OK].
To return to the screen for setting the same width for all four borders, press
[Adjust All At Once].
The selected mode is set.
Press [Done].
The display returns to the Copy Basic Features screen.
Press
(Start).
Copying starts.
NOTE
To cancel this setting, press [Special Features] ➞ [Frame Erase] ➞ [Cancel].
•
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).