Registering Ic Card Information (When The Data Type Is "Byte"); Deleting An Ic Card Information Template - Konica Minolta bizhub C364e User Manual

Authentication Manager

Registering IC card information (when the data type is "Byte")

If the type of the data specified in a template is "Byte", configure the
following settings.
Template Name
Data Type
Scanning Start Position (Byte)
ID Length (Byte)
Reverse
Hex Format
Conversion method of Card ID

3.14.2 Deleting an IC card information template

An IC card information template can be deleted.
1
In the IC card information template setting page, select a template to
be deleted, and then click the [Delete] button.
2
Check the message that appears, and then click the [OK] button to
delete the template.
The template is deleted.
Authentication Manager
Type in the template name.
Select the data type of an IC card.
Specify the card ID starting position.
Specify the length of a card ID.
Select this check box to convert a card ID in the reverse or-
der.
Selecting this check box processes a card ID in hexadeci-
mal values.
Clearing this check box processes a card ID in ASCII.
Select a method to convert a card ID.
• "Do not convert.": A conversion is not performed.
• "Decimal": Converts a card ID to a decimal value.
• "To lower case": Converts all card ID characters to lower
case.
• "To upper case": Converts all card ID characters to up-
per case.
3
3-132