Unregistering A Specific Device - Konica Minolta bizhub C364e User Manual

Authentication Manager
Function
Registered Name
Model Name
User authentication
Account Track
Account Password
IC Card Authentication Password
Public User
Default biometric unit number
Terminal
Reminder
For details on the result page after registering a specific device, refer to
"Checking the result of registering or unregistering a specific device" on
page 3-121.
Note
If the device is registered to be managed, the user information (user
names and passwords) on the device is deleted and users can no longer
be registered with the device.
If the device is excluded from managed devices, authentication is not
performed. In this case, the authentication method for the device is set to
"Not Authentication". The history is also deleted.
When an external authentication device is used, Authentication Manager
must be registered to the device each time the device is disconnected
and connected.

3.11.8 Unregistering a specific device

Specify that authentication from the device is performed with Authentication
Manager.
1
From the [Device Group] drop-down list, select the device group to be
displayed.
Authentication Manager
Details
Displays the registered name for the device.
Displays the model name for the device.
Displays whether to use a relay server or external server for
user authentication.
Displays whether or not the account track is managed.
Displays whether or not the account track password is
used.
Displays whether or not passwords are to be used with IC
card authentication.
Displays whether or not the public user is used.
Displays the set value of the default biometric unit number.
Displays whether the device is using Enterprise Suite Ter-
minal.
• in use: The device is using Enterprise Suite Terminal.
• Will Not Display: The device is not using Enterprise Suite
Terminal.
3
3-120