Ic Card Self-Registration - Konica Minolta bizhub C364e User Manual

Authentication Manager

3.13.2 IC card self-registration

The self-registration function becomes available when a user logs on while
satisfying the following conditions.
- Self Registration is set to "Allow" in IC Card Authentication Setting.
- The target device is registered while an IC card reader is connected to
the device.
- The user holds the IC card over the card reader for authentication, after
entering the user name and password on the device panel.
- For an external server user, IC card information is held in Authentication
Manager.
If a user has entered the correct user name and password while self-
registration conditions are satisfied, the IC card information used is saved in
IC card 3.
Authentication Manager
3
3-128