Biometric Information Self-Registration; Self-Registering Biometric Information - Konica Minolta bizhub C364e User Manual

Authentication Manager

3.16.2 Biometric information self-registration

The self-registration function becomes available when a user logs on while
the following conditions are satisfied.
- Self Registration is set to "Allow" for Bio Auth Setting.
- The target device is registered while an authentication device is
connected to the device.
- There are no users in Authentication Manager with biometric information
that is identical to the biometric information acquired from the
authentication device.
- The user holds a finger over the authentication device for authentication,
after entering the user name and password on the device panel.
- "Allow Overwrite" is set for [Setting for Overwriting Biometric Info] in the
Bio Auth Setting page, or either Biometric Information 1 or Biometric
Information 2 is unregistered.
When the conditions required for the self-registration function to operate are
satisfied and the user name and password entered by the user are correct,
the user's biometric information is stored.
Reminder
After a user completes self-registration, "Biometric Registration" is
displayed for the user in the user list registered in the biometric unit.

Self-registering biometric information

1
Enter your user name and password on the device panel.
2
Place your finger on the authentication device.
The password authentication process starts. When authentication is
successfully completed, the Biometric Information Registration page
appears on the control panel of the device.
3
Register your biometric information in the Biometric Information
Registration page.
You will be able to log on after successfully registering.
Your biometric information is also registered automatically in
Authentication Manager.
Authentication Manager
3
3-137