Glass Removal and Replacement (Figures 73 and 74)
1.
Remove decorative front doors (where applicable) by opening
and lifting straight up.
2.
Remove decorative front by tilting lower portion forward to
release ball catch and lifting front off mounting bracket. See
Figure 73.
3. Release two glass frame clamps at bottom of firebox.
4. Remove glass frame.
5. Place glass frame onto firebox.
6. Attach two glass frame clamps at bottom of firebox.
7. Replace decorative front by hooking front mounting brackets.
Be sure to lower front with slight angle to keep ball clasp from
scratching the front of appliance. Push in lower portion to lock
ball clasp.
8. Replace decorative front doors by aligning hinges over
posts.
25613-0-0309
MAINTENANCE AND SERVICE
Figure 73
Figure 74
Page 61