VENTING FIREPLACE - TOP (continued)
Installation of Flue Heat Shield
1.
Remove flue insulation.
2.
Remove (2) screws on outside of inlet vent adapter.
See Figure 18.
3.
Lift top shield placing flue heat shield around flue.
4.
Replace (2) screws on outside of inlet vent adapter.
See Figure 19.
5.
Bend tab at top front of flue heat shield if necessary to maintain
air gap between flue pipe and flue heat shield.
6.
Replace flue insulation.
25613-0-0309
Figure 18
HOLES FOR 42" MODELS
TAB
HOLES FOR 36" MODELS
NOTE: 42" MODEL SHOWN
Figure 19
Page 15