Test Prints - Tektronix Z740/N - Phaser 740 Color Laser Printer Service Manual

This appendix illustrates the test prints produced by the print engine. It also
illustrates a number of defective prints and the reason for the defects. The topic
"Printing and print quality problems" on page 47 discusses solutions to the problems
shown in this appendix.
Consumables Print consists of four 25% tint primary color bands and "gas gauges" for
each consumable. Service Print 1 prints out four 25% tint full page fills, each page one
primary color. Service Print 2 produces a 1200 dpi test print, a solid red fill prints and
a 600 dpi test print.
From the Help Pages menu in the front panel, select Consumables Page
Consumables page
<---
From the Help Pages menu in the front panel, select Service Print 1
Service Print 1
<---
From the Help Pages menu in the front panel, select Service Print 2
Service Print 2
<---

Test Prints

---> Print
---> Print
---> Print
Toner
Black
Page Remaining: >500 @ 5% coverage
OK Your average coverage/page: TBD%
Power
Magenta
Page Remaining: >500 @ 5% coverage
OK Your average coverage/page: TBD%
=
Cyan
Page Remaining: >500 @ 5% coverage
OK Your average coverage/page: TBD%
Yellow Page Remaining: >500 @ 5% coverage
OK Your average coverage/page: TBD%
Imaging Unit Life Remaining % Main Charge Grid Life Remaining %
Error
0% 50% 100% 0% 50% 100%
Count (Pages) Count (images)
Serial #
Avg. Toner Coverage/Color
Date Installed
Fuser Life Remaining % Fuser Roll Life Remaining %
0% 50% 100% 0% 50% 100%
Count (Pages) Count (Pages)
Serial #
Avg. Toner Coverage/Color
Date Installed
Transfer Kit Life Remaining
%
0% 50% 100%
Count (Pages)
Power
=
Error
Black
Cyan
Magenta
Power
=
Error
Service Guide
Consumables Print
Black
Cyan
Magenta
Yellow
Yellow
CMYK
3102-36
103