Cork Separator Pad; Removing The Cork Separator Pad - Tektronix Z740/N - Phaser 740 Color Laser Printer Service Manual

Cork separator pad

The cork separator pad should be replaced whenever the multi-purpose pick roller is
replaced. The life is about 30k prints.
1.
Grasp the paper guide and push in and down to the bottom of it travel, then
tilt it forward.
2. With a small, narrow, flat-blade screwdriver, reach behind the cork
separator pad and free the two retaining hooks hold the separator pad in
place. Note the spring is under tension. Remove the separator pad and
spring.
3.
Install a new cork separator pad.
Retaining
hooks
Cork separator pad

Removing the cork separator pad

76
Phaser 740 Color Printer
Paper guide
Spring
Paper guide
740-7-6