RRP 51 Accumulator Belt Drive Assembly
Figure 7-57 Accumulator Belt Drive Assembly
Removal
1.
Remove the Rear Cover and Shield (RRP 9, on page 7-163).
2.
Lower the T1 and T3 power supply to horizontal (RRP 44, on page 7-208).
3.
Remove any components covering the motor which is mounted to the
frame at the rear, top left corner.
4.
Remove the three screws that secures the motor and bracket assembly to
the frame and remove the assembly.
Phaser 7700 Color Laser Printer Service Manual
S7700-007
7-217