Figure 11-11 Horizontal Transport Belts - Xerox 7700DX - Phaser Color Laser Printer Service Manual

RRP 69 Horizontal Transport Belts

Figure 11-11 Horizontal Transport Belts

Removal
1. Remove the Horizontal Transport Covers (RRP 67, on page 11-325).
2. Remove the KL-clips from the horizontal transport In and Out.
3. Remove the bearings from the horizontal transport In and Out shafts.
4. Remove one end of each horizontal transport belt roller support.
5. Remove the belts.
Replacement
Note When reinstalling the belts, ensure that the textured side
is out.
Note If necessary, remove the KL-clip and gear from the out
roller to reinstall the belts to help install the bearing.
Phaser 7700 Color Laser Printer Service Manual 11-327