RRP 48 T2 High-Voltage Power Supply
Figure 7-54 T2 High-Voltage Power Supply
Removal
1.
Remove the +24 VDC Power Supply and Bracket (RRP 11, on page
7-165).
2.
Disconnet the high-voltage wires from the KCMY connectors.
3.
Disconnect the wiring harness from J575 and J576.
4.
Remove the two screws that secure the 1
frame.
5.
Remove the T2 High-Voltage Power Supply.
Phaser 7700 Color Laser Printer Service Manual
st
BTR assembly to the printer
7-213