Figure 7-51 3.3 Vdc And 5 Vdc Low-Voltage Power Supplies; Rrp 45 3.3 Vdc And 5 Vdc Low-Voltage Power Supplies And Bracket - Xerox 7700DX - Phaser Color Laser Printer Service Manual

RRP 45 3.3 VDC and 5 VDC Low-Voltage Power
Supplies and Bracket

Figure 7-51 3.3 VDC and 5 VDC Low-Voltage Power Supplies

Removal
Note If removing only one of the low-voltage power supplies,
disconnect the associated wiring harness from the
printer, and remove the 4 screws that secure the
low-voltage power supply to the mounting bracket.
1. Lower the T1 and T3 power supply to horizontal (RRP 44, on page 7-208).
2. Disconnect P/Js 8, 12, 15 & 16 from the low-voltage power supplies.
3. Loosen the four screws the secure the mounting bracket to the frame.
4. Lift the bracket up and out to remove.
7-210
Phaser 7700 Color Laser Printer Service Manual