Before First Use - AEG 49002VMN User Manual

www.aeg.com
8

BEFORE FIRST USE

WARNING!
Refer to "Safety information"
chapter.
INITIAL CLEANING
• Remove all accessories and removable
shelf supports (if applicable).
• Clean the appliance before first use.
Refer to the chapter "Care and
cleaning".
SETTING THE TIME
You must set the time before you
operate the oven.
When you connect the appliance to the
electrical supply or after a power cut, the
indicator for the Time function flashes.
Press the + or - button to set the correct
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
You can only change the time
• The child safety device is not
• None of the clock functions Du-
• No oven function is set.
PREHEATING
Preheat the empty appliance to burn off
the remaining grease.
1.
Set the function
temperature.
2. Let the appliance operate for one
hour.
3.
Set the function
temperature.
4. Let the appliance operate for ten mi-
nutes.
5.
Set the function
temperature.
6.
Let the appliance operate for ten mi-
nutes.
Accessories can become hotter than usu-
ally. The appliance can emit an odour and
if :
on.
ration or End
and the maximum
and the maximum
and the maximum
smoke. This is normal. Make sure that the
airflow is sufficient.
is set.