Oven - Clock Functions - AEG 49002VMN User Manual

OVEN - CLOCK FUNCTIONS

Clock function
Duration
used at the same time, if the oven
is to be switched on and off auto-
matically later. In this case first set
Duration
SETTING THE CLOCK
FUNCTIONS
1. Activate the appliance.
2.
Use
display shows the necessary clock
function and the related symbol, for
example Minute Minder
3.
Use
time.
When the time is completed, an
acoustic signal sounds for 2 minutes,
and "00.00" and the related function
indicator flash. The appliance deacti-
vates.
Press a button to stop the acoustic
4.
signal.
With Minute Minder
activate the oven to set the clock
function.
With Duration
the oven deactivates automatical-
ly. You must set the oven function
and the temperature first before
you can set the clock function.
HEAT+HOLD
The Heat+Hold function keeps prepared
food warm for 30 minutes after the cook-
ing is completed.
Activating Heat+Hold
1. Set the time with the clock functions
Duration
Time of day Shows the time. To set, change or check the time.
Minute minder To set a countdown time.
A signal sounds, after the time period is completed.
Duration To set how long the oven has to be in operation.
End To set the switch-off time for an oven function.
and End
, then End
again and again until the
or to set the necessary
and End
and/or End
Application
2.
can be Use Selection
until the display shows the symbol
Keep warm
3.
Press
.
"00:30".
4. When the set oven function is com-
pleted, a signal sounds and Heat
+Hold starts. The set oven function
operates at 80°C for 30 minutes. The
oven then deactivates automatically.
.
, you must
,
.
again and again
.
and the display shows
The temperature for the set oven
function must be above 80°C.
ENGLISH
19