Chapter
3
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
The PoE Settings Page displays the currently configured PoE ports and contains the following
information:
•
Port — Displays the selected port's number.
•
Admin Status — Indicates whether PoE is enabled or disabled on the port. The possible values are:
–
Enable — Enables PoE on the port. This is the default setting.
–
Disable — Disables PoE on the port.
•
Priority — Indicates the PoE ports' priority. The possible values are: Critical, High and Low. The
default is Low.
•
Power Allocation (3000-15400 milliwatts) — Indicates the power allocated to the port. The range
is 3000-15400 milliwatts.
•
Mode — Indicates if the port is enabled to work on PoE. The possible field values are:
–
On — Indicates the device is delivering power to the interface.
–
Off — Indicates the device is not delivering power to the interface.
–
Test Fail — Indicates the powered device test has failed. For example, a port could not be
enabled and cannot be used to deliver power to the powered device.
–
Testing — Indicates the powered device is being tested. For example, a powered device is
tested to confirm it is receiving power from the power supply.
32
PoE Settings Page
Chapter 3: